Pause scan operation for the alarm.
Consumption of the battery is minimized by paused before shift to the background process.
Pause warning sound of all GPS signal and sound of warning during the scan.
You can stop all the sound of the application. then the vibration alert and display warning continues.
It is restored with setting at returning from the setting screen.
Section 2 above, is possible only if you enable the scan function in the setting screen.
Mirror switch the display screen
Calling the setup screen
Direction sensor switching (by tap operation)
It is not possible when "automatic direction sensor" is enabled in the setting screen, to switch this.
Total mileage reset
Traveling speed instruction
Traveling direction display
ORBIS registration number of adjacent land within 5km
It flash at the time of reception of GPS.
Scanning instruction execution time is red-flash and it becomes white-flash at the time of a scanning stop.
The change of the display mode of a map
current-location-follow <-> turning-the-head-up is changed one by one.
Roll operation is not supported at the time of current-location-follow and turning-the-head-up mode.
Tap the arrow maker,It becomes free-scroll mode.
A self-position and an advance direction are displayed.
It changes to free-scroll-mode at the time of a touch.
return to following mode by
You can operate the zoom of the map by a double tap, a pinch.
A map direction is displayed.
A sub menu is displayed with the push and hold tap of the map side.It becomes undisplayed by the tap of a map screen.
The change method of a direction device is chosen.
LongPress to migrate to the speed-sensitive switching mode. (new function)
The display mode of a map is changed.
Switching between day and night mode in normal map selection button, it will transition to the automatic switching mode in the long press. (new function).
change traffic information indication.